SubmarineCraft Forum

 Forgot password?
 Register
Search
Hot search: 活动 交友 discuz
View: 280|Reply: 0

【Primary 初级教程】 2. Diving.下潜

[Copy link]

34

Threads

36

Posts

161

Credits

Admin

Rank: 9Rank: 9Rank: 9

Credits
161
Post time 2019-2-6 23:07:58 | Show all posts |Read mode
According to the figure placed. we added ballast tank this time.
先按如同摆放。和之前不同的是我们这次多加了压载水舱。


Place two pumps for water intake and drainage.
Note that the Yellow direction of the pump is the outlet.
So the pump on the left is used to drain water, and the pump on the right is used to pump water into the ballast tank.
Similarly, by binding the button to "Ascend" and "Dive".
The intake pump is used for sinking and the drainage pump for go up.
摆放两个水泵,分别用来进水和排水用。
注意,水泵黄色的方向是出水口。
所以图中左边的水泵用来排水,右边的用来抽水进舱内。

同样的,通过绑定按钮分别绑定对应的上浮和下沉按钮。
进水泵用来下沉,排水泵用来上浮。






Put a certain amount of water in the ballast tank. By default, the buoyancy and gravity of the boat are balanced when it first enters the game. Without some water, it can only sink and not go up.
在压载水舱中放一定量的水。因为默认刚进入游戏时船的浮力和重力是平衡的,不放点水就只能下沉不能上浮了。



Click the green start button to enter the sail mode.
Press "W" key can ascend.
Press "S" key can dive.
Press "Tap" key can automatic balance.",
点击开始按钮进入航行模式。
使用 "W" 键可以上浮。
使用 "D" 键可以下沉。
使用 "Tap" 键可以启动自动平衡。",






Reply

Use magic Report

You have to log in before you can reply Login | Register

Points Rules

Archiver|手机版|小黑屋|91miaoyue.com ( 桂ICP备18010869号-1 )

2019-5-24 11:50 GMT+8 , Processed in 0.091453 second(s), 22 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

Quick Reply To Top Return to the list